--- acinclude.m4 +++ acinclude.m4 @@ -4655,7 +4655,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -4667,16 +4667,16 @@ hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) --- cdemo/acinclude.m4 +++ cdemo/acinclude.m4 @@ -4655,7 +4655,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -4667,16 +4667,16 @@ hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) --- cdemo/configure +++ cdemo/configure @@ -10765,7 +10765,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -10777,16 +10777,16 @@ hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator @@ -13840,7 +13840,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -13852,16 +13852,16 @@ hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX @@ -16461,7 +16461,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -16473,16 +16473,16 @@ hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 @@ -19086,7 +19086,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19098,16 +19098,16 @@ hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ @@ -19572,7 +19572,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19584,16 +19584,16 @@ hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC --- configure +++ configure @@ -11388,7 +11388,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -11400,16 +11400,16 @@ hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator @@ -14463,7 +14463,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -14475,16 +14475,16 @@ hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX @@ -17084,7 +17084,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -17096,16 +17096,16 @@ hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 @@ -19709,7 +19709,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19721,16 +19721,16 @@ hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ @@ -20195,7 +20195,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -20207,16 +20207,16 @@ hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC --- demo/acinclude.m4 +++ demo/acinclude.m4 @@ -4655,7 +4655,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -4667,16 +4667,16 @@ hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) --- demo/configure +++ demo/configure @@ -11171,7 +11171,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -11183,16 +11183,16 @@ hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator @@ -14246,7 +14246,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -14258,16 +14258,16 @@ hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX @@ -16867,7 +16867,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -16879,16 +16879,16 @@ hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 @@ -19492,7 +19492,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19504,16 +19504,16 @@ hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ @@ -19978,7 +19978,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19990,16 +19990,16 @@ hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC --- depdemo/acinclude.m4 +++ depdemo/acinclude.m4 @@ -4655,7 +4655,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -4667,16 +4667,16 @@ hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) --- depdemo/configure +++ depdemo/configure @@ -11060,7 +11060,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -11072,16 +11072,16 @@ hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator @@ -14135,7 +14135,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -14147,16 +14147,16 @@ hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX @@ -16756,7 +16756,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -16768,16 +16768,16 @@ hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 @@ -19381,7 +19381,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19393,16 +19393,16 @@ hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ @@ -19867,7 +19867,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19879,16 +19879,16 @@ hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC --- f77demo/acinclude.m4 +++ f77demo/acinclude.m4 @@ -4655,7 +4655,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -4667,16 +4667,16 @@ hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) --- f77demo/configure +++ f77demo/configure @@ -11741,7 +11741,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -11753,16 +11753,16 @@ hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator @@ -14832,7 +14832,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -14844,16 +14844,16 @@ hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX @@ -17453,7 +17453,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -17465,16 +17465,16 @@ hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 @@ -20094,7 +20094,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -20106,16 +20106,16 @@ hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ @@ -20580,7 +20580,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -20592,16 +20592,16 @@ hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC --- libltdl/acinclude.m4 +++ libltdl/acinclude.m4 @@ -4655,7 +4655,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -4667,16 +4667,16 @@ hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) --- libltdl/configure +++ libltdl/configure @@ -11255,7 +11255,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -11267,16 +11267,16 @@ hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator @@ -14330,7 +14330,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -14342,16 +14342,16 @@ hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX @@ -16951,7 +16951,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -16963,16 +16963,16 @@ hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 @@ -19576,7 +19576,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19588,16 +19588,16 @@ hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs= # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ @@ -20062,7 +20062,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -20074,16 +20074,16 @@ hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC --- libtool.m4 +++ libtool.m4 @@ -4655,7 +4655,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -4667,16 +4667,16 @@ hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) --- mdemo/acinclude.m4 +++ mdemo/acinclude.m4 @@ -4655,7 +4655,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -4667,16 +4667,16 @@ hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) --- mdemo/configure +++ mdemo/configure @@ -11186,7 +11186,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -11198,16 +11198,16 @@ hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator @@ -14261,7 +14261,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -14273,16 +14273,16 @@ hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX @@ -16882,7 +16882,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -16894,16 +16894,16 @@ hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 @@ -19507,7 +19507,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19519,16 +19519,16 @@ hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ @@ -19993,7 +19993,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -20005,16 +20005,16 @@ hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC --- mdemo2/acinclude.m4 +++ mdemo2/acinclude.m4 @@ -4655,7 +4655,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -4667,16 +4667,16 @@ hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) --- mdemo2/configure +++ mdemo2/configure @@ -10873,7 +10873,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -10885,16 +10885,16 @@ hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator @@ -13948,7 +13948,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -13960,16 +13960,16 @@ hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX @@ -16569,7 +16569,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -16581,16 +16581,16 @@ hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 @@ -19194,7 +19194,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19206,16 +19206,16 @@ hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ @@ -19680,7 +19680,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19692,16 +19692,16 @@ hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC --- pdemo/acinclude.m4 +++ pdemo/acinclude.m4 @@ -4655,7 +4655,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -4667,16 +4667,16 @@ hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) --- pdemo/configure +++ pdemo/configure @@ -10876,7 +10876,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -10888,16 +10888,16 @@ hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator @@ -13951,7 +13951,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -13963,16 +13963,16 @@ hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX @@ -16572,7 +16572,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -16584,16 +16584,16 @@ hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 @@ -19197,7 +19197,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19209,16 +19209,16 @@ hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ @@ -19683,7 +19683,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19695,16 +19695,16 @@ hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC --- tagdemo/acinclude.m4 +++ tagdemo/acinclude.m4 @@ -4655,7 +4655,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -4667,16 +4667,16 @@ hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) --- tagdemo/configure +++ tagdemo/configure @@ -11299,7 +11299,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -11311,16 +11311,16 @@ hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator @@ -14374,7 +14374,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -14386,16 +14386,16 @@ hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX @@ -16995,7 +16995,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -17007,16 +17007,16 @@ hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 @@ -19620,7 +19620,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -19632,16 +19632,16 @@ hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ @@ -20106,7 +20106,7 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. -runpath_var=$runpath_var +runpath_var= # This is the shared library path variable. shlibpath_var=$shlibpath_var @@ -20118,16 +20118,16 @@ hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +hardcode_into_libs=no # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC +hardcode_libdir_flag_spec= # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +hardcode_libdir_flag_spec_ld= # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC